Description
G.fast, VDSL and Ethernet Load Balancer
The Vigor 2866Vac is a G.fast, VDSL2/ADSL2+ and Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management and more. Connect the Vigor 2866 to Superfast Fibre with its integrated G.fast and VDSL modem. Or connect to VirginMedia Cable and Ultrafast FTTP with Ethernet WAN.
Featuring high throughput with Load Balancing and Failover connectivity, suitable for handling Fibre to the Premises (FTTP) and Gigabit Internet connections. Offering up to 950Mbps per-WAN of Hardware Accelerated throughput while retaining its full feature set.
With 802.11ac wireless, it provides fast wireless coverage to your network’s computers and devices. In addition, the router can connect to Wireless networks for Internet access, allowing it to make use of Mobile Hotspot wireless connections and nearby wireless networks, where for instance a neighbour’s wireless network could provide an emergency backup connection.
The 2866Vac features an integrated VoIP SIP ATA, to connect 2 analogue handsets to Voice over IP, to connect PSTN telephones and fax machines.
Integrated VoIP Telephone Ports
The Vigor 2866Vac features an integrated VoIP ATA (Analogue Telephone Adapter). This connects two analogue phones to Voice over IP for use with hosted PBX systems and VoIP/SIP telephone services. Either 1 or 2 telephones or DECT handsets can be connected, for use independently and simultaneously, for both incoming and outgoing calls.
Use the ‘Digit-Map’ feature to direct calls through different SIP/VoIP services. For instance, local calls can be made through one VoIP provider. International calls would route through an alternative VoIP provider, with better pricing on calls outside of the UK. Digit Map allows for extremely flexible call routing.
Integrating the VoIP ATA into the router ensures that no port forwarding or NAT handling is typically needed. Simply connect the Vigor 2866Vac to the Internet and configure your VoIP account details to make and receive calls.
AC1300 Wireless LAN with Mesh
The 2866 series ‘ac’ models provide 802.11ac simultaneous Dual-Band wireless for fast and efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless and allowing the router to effectively serve more wireless clients.
Ideal VPN router for SMB
A feature central to DrayTek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices and branch offices back to HQ, or home-based/mobile teleworkers back to your office.
The Vigor 2866 is an ideal VPN router, with 300 Mbps standard IPsec VPN throughput and up to 50 concurrently active VPN tunnels.
IPsec Hardware Acceleration boosts performance, up to 800 Mbps for 16 VPN tunnels, allowing securely encrypted tunnels between sites to make full use of high speed Internet connections.
It supports all common industry standard VPN protocols, for it to connect to VPN services, link remote offices and handle connections from all types of VPN clients. Supporting IPsec IKEv1 & IKEv2 protocols with EAP and XAuth authentication, DrayTek’s SSL VPN and L2TP for both LAN to LAN and Dial-In teleworker VPNs. In addition, teleworkers can connect to the router with OpenVPN.
User management for Dial-In Teleworkers is managed through the router’s web interface, with mOTP 2-factor authentication available for IPsec, L2TP and SSL VPN Teleworker connections. Alternatively, authentication for Dial-In Teleworker connections can be forwarded to your Active Directory (LDAP) or RADIUS or TACACS+ server.
Connect VPNs from behind NAT with DrayTek’s VPN Matcher
A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.
DrayTek’s new VPN Matcher service helps DrayTek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two DrayTek VPN routers that are behind NAT and could not normally establish a VPN tunnel.
Connecting Remote Sites with LAN to LAN VPN
Supporting up to 32 concurrently active VPN tunnels, the Vigor 2866 series is ideal for connecting multiple sites or home offices together with fast and secure IPsec VPN tunnels.
Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing and seamless access to other resources and devices.
DrayTek SSL VPN for Dial-In Teleworkers & LAN to LAN
The Vigor 2866 supports up to 16 active DrayTek SSL VPN tunnel connections. These are encrypted tunnels linking your teleworkers or remote DrayTek Vigor routers back to your main office using SSL/TLS technology – the same encryption that you use for secure web sites such as your bank.
Teleworkers can easily create a secure SSL VPN tunnel to the DrayTek Vigor 2866 using the free DrayTek Smart VPN Client app. Available for Windows, macOS, Apple iOS (iPad, iPhone) and Android devices.
5+1 Gigabit LAN Ports with VLANs
The Vigor 2866 series provides up to 6 Gigabit LAN ports for wired links to Computers, Servers and Network Attached Storage.
With 5 dedicated LAN ports and one flexible LAN/WAN port, the Vigor 2866 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.
With Multiple LAN subnets and VLANs, the Vigor 2866 can manage up to 8 separate networks. For instance, an internal network with a separate network for Guests to use, completely separate from the private
Reviews
There are no reviews yet.